주요 콘텐츠로 건너뛰기

Motorola Droid Pro SD Card/SIM Card PCB Board Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

3 단계
Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: 0 단계, 이미지 1개 중 1개
  • Use a spudger to open the phone along the sides between the back panel and the chrome trim.

  • It is held together by small clips that lock in. You may have to use a little force to unlock them.

  • Go around on all sides then pull the back panel off.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.