주요 콘텐츠로 건너뛰기

Olympus Tough TG-1 Backplate Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

3 단계
Olympus Tough TG-1 Backplate Replacement, Bottom: 0 단계, 이미지 1개 중 1개
Bottom
  • Turn the camera so that you are looking at the bottom of the camera.

  • Remove the two 4 mm screws from the bottom of the camera.

  • The screws are different. The rear screw is has an unthreaded shank to locate the outer shell while screwing into the inner frame.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.