Skip to main content
6단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Flip the phone over.

Push an opening pick slowly and firmly down the right edge of the battery (which should be warm). Slide it slightly back and forth to slice through the adhesive.

Be careful not to snag the white antenna cable running along the edge of the battery while you are push down on the pick.

If you are having a hard time getting the opening pick under the battery, heat and re-apply an iOpener as instructed in the previous step.

You can also apply some high concentration isopropyl alcohol to the edge in order to help weaken the adhesive.

Once you have loosened the right side of the battery from the case, leave an opening pick in place to prevent the adhesive from re-adhering.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.