Skip to main content
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the 6 outer screws on the underside of the laptop.

Open the battery compartment and remove the 7 visible screws.

Pry the corners of the bezel at the base of the keyboard, pushing up until it loosens.

Carefully remove the ribbon connections of the keyboard, power button, and wifi button.

Disconnect and re-connect the white monitor ribbon located on the left side to make sure it sits firmly in the connection.

Reassemble the laptop by following these steps in reverse.

The monitor should work when powered on again.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.