Skip to main content
도움말
13단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The connectors removed in the next few steps slide onto long pins attached to the logic board. Be sure to only pull them straight up from the logic board to avoid bending the pins.

If you do bend the pins during removal, use the connectors as a guide to bend them back straight.

Use the tip of a spudger to lift the speaker cable connector from its lower edge straight up off the logic board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.