주요 콘텐츠로 건너뛰기

iMac Proの分解

15 단계
iMac Pro Teardown: 0 단계, 이미지 3개 중 1개 iMac Pro Teardown: 0 단계, 이미지 3개 중 2개 iMac Pro Teardown: 0 단계, 이미지 3개 중 3개
  • We've scoured this chassis for parts, and there's not much left—except for the outrageously awesome spring-loaded hinge mechanism that supports the display.

  • If you opt for Apple's VESA mount adapter kit, you'll get to indulge in a rare moment of Apple-sanctioned disassembly of your iMac Pro: inserting a card in the back disengages the spring, unveiling the row of Torx screws securing the stand.

  • This is probably the one and only time Apple will sell you a screwdriver and tell you to have at it.

  • Of course, if you're reading this, there's a good chance you're already fully prepared.

このボディをパーツに分解しました。その後はあまり残っていませんーディスプレイをサポートしている素晴らしいバネ仕掛けの蝶番が残っているぐらいです。

AppleのVESA Mount Adapter Kitでマウントブラケットに交換を考えている方は、Apple史上初かつ最後の認可済みiMac Proの解体の瞬間を楽しめるはずです。裏側にカードを挿入してバネを解放すると、スタンドに固定されたトルクスネジの列を発見できます。

おそらくこれがAppleの歴史上発売される最初で最期のトルクスネジ用ドライバーとなるでしょう。このドライバーを使って解体を指示することも今後ないでしょう。

もちろんですが、この分解を読んでいるあなたならお持ちですよね、準備万端のツールセット

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.