/
내 작업대

기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
가입
로그인

Remplacement du clavier du HP Stream 13-c002dx

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

안내서로 돌아가기
영어
프랑스어
다음 단계

1 단계 번역중

1 단계
HP Stream 13-c002dx Keyboard Replacement: 0 단계, 이미지 2개 중 1개 HP Stream 13-c002dx Keyboard Replacement: 0 단계, 이미지 2개 중 2개

  • Begin by placing your laptop on a clean surface such as a table and away from any liquids which may spill and damage components.

  • Flip the laptop over so the bottom is facing up.

  • Use your Phillips #0 screwdriver to remove the eleven visible 5 mm screws on the back of the laptop.

  • There are some screws underneath the rubber feet. Use a spudger to remove them and gain access.

  • Unscrew the two remaining 2.5mm screws. Keep these screws separate from the first eleven 5mm screws.

Commencez par poser votre ordinateur sur une surface propre, une table par exemple, et loin de tout liquide qui pourrait se renverser et causer des dégâts.

Retournez l'ordinateur et prenez un tournevis cruciforme #0 pour dévisser les 11 vis de 5 mm visibles derrière.

Quelques vis sont cachées sous des patins en caoutchouc. Retirez-les pour y accéder.

Dévissez les deux dernières vis de 2,5 mm. Mettez-les de côté séparément des premières onze vis de 5 mm.

-[* black] Begin by placing your laptop on a clean surface such as a table and away from any liquids which may spill and damage components.
-[* red] Flip the laptop over so the bottom is facing up and use your Phillips #0 screwdriver to remove the 11 visible 5mm screws on the back.
- [* icon_note] There are some screws underneath the rubber feet. Remove them to gain access
+[* icon_note] Begin by placing your laptop on a clean surface such as a table and away from any liquids which may spill and damage components.
+[* black] Flip the laptop over so the bottom is facing up.
+[* red] Use your Phillips #0 screwdriver to remove the eleven visible 5 mm screws on the back of the laptop.
+ [* icon_note] There are some screws underneath the rubber feet. Use a spudger to remove them and gain access.
[* orange] Unscrew the two remaining 2.5mm screws. Keep these screws separate from the first eleven 5mm screws.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.