/
내 작업대

기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
가입
로그인

Samsung Galaxy Note20 Rückabdeckung tauschen

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 12개에 영향을 미칩니다.

안내서로 돌아가기
영어
독일어
4 단계
Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: 0 단계, 이미지 3개 중 1개 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: 0 단계, 이미지 3개 중 2개 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: 0 단계, 이미지 3개 중 3개
Cut along the perimeter of the rear cover

  • Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover.

  • You can insert each new opening pick in the gaps created by the opening picks left in each corner.

  • As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing.

  • If the rear cover is still attached to the frame after cutting through all four sides, try slicing through the adhesive again with an opening pick.

Rund um den Rand der Rückabdeckung schneiden

Wiederhole das Verfahren, also das Erwärmen und Auftrennen des Klebers, an den restlichen drei Seiten der Rückabdeckung.

Setze jeweils ein neues Plektrum in den Spalt ein, der durch das Plektrum entstanden ist, welches in der Ecke stecken bleibt.

Lasse im Verlauf der Arbeit ein Plektrum in jeder Ecke stecken, damit sich der Kleber nicht wieder verbinden kann.

Wenn die Rückabdeckung immer noch am Rahmen festklebt, nachdem du alle vier Seiten aufgeschnitten hast, versuche nochmals mit dem Plektrum den Kleber aufzutrennen.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.