/
내 작업대

기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
가입
로그인

Desmontaje Completo del Mando (Controlador) Inalámbrico de la Xbox Series X|S (Model 1914)

안내서로 돌아가기
영어
스페인어
10 단계
Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the motherboard: 0 단계, 이미지 3개 중 1개 Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the motherboard: 0 단계, 이미지 3개 중 2개 Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the motherboard: 0 단계, 이미지 3개 중 3개
Removing the motherboard

  • Next we remove the two screws in the bottom corners (using T6 bit). Next we can lift the motherboard up. NOTE that the 3.5mm jack is not soldered and just sandwiched between the two boards.

  • When assembling the device note that the multiple metal pieces on the 3.5mm go towards the motherboard.

  • For removing the motherboard just simply lift it from one of the corners without bending it too much. (sorry the camera was out of focus)

Extracción de la placa base

A continuación quitamos los dos tornillos de las esquinas inferiores (usando punta T6). A continuación, podemos levantar la placa base. TEN EN CUENTA que el conector de 3,5 mm no está soldado y solo está intercalado entre las dos placas.

Al ensamblar el dispositivo, ten en cuenta que las múltiples piezas de metal en el 3,5 mm van hacia la placa base.

Para quitar la placa base, simplemente levántala de una de las esquinas sin doblarla demasiado. (lo siento, la cámara estaba fuera de foco)

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.