주요 콘텐츠로 건너뛰기

iPad 7 LCD Replacement

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 15 안내서에 영향을 미칩니다.

1 단계 번역중

1 단계
iPad 7 LCD Replacement, Remove the LCD: 0 단계, 이미지 2개 중 1개 iPad 7 LCD Replacement, Remove the LCD: 0 단계, 이미지 2개 중 2개
Remove the LCD
  • Use a Phillips screwdriver to remove the four 4.3 mm-long screws securing the LCD to the frame.

  • Remove any tape obscuring the LCD screws.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

십자 드라이버를 사용하여 LCD를 프레임에 고정하는 4.3mm 길이의 나사 4개를 풀어주세요.

LCD 나사를 덮고 있는 테이프를 떼어내세요.

수리하는 동안 각 나사를 추적하고 기기 손상을 방지하기 위해 나사가 원래 있던 위치로 정확히 돌아가는지 확인하세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.