주요 콘텐츠로 건너뛰기

Opening Procedure

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 73개에 영향을 미칩니다.

7 단계
Opening Procedure, Separate the left adhesive: 0 단계, 이미지 3개 중 1개 Opening Procedure, Separate the left adhesive: 0 단계, 이미지 3개 중 2개 Opening Procedure, Separate the left adhesive: 0 단계, 이미지 3개 중 3개
Separate the left adhesive
  • Insert a second opening pick into the gap you just created.

  • Slide the pick toward the bottom-left corner of the device to separate the adhesive.

  • Leave the pick in the bottom-left corner to prevent the adhesive from re-sealing.

  • Don't worry if you can see the opening pick through the digitizer—just pull the pick out. The LCD screen shouldn't be damaged, but you risk leaving behind hard-to-clean adhesive.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.