주요 콘텐츠로 건너뛰기

iPad Pro 12.9" 4th Gen 로직 보드 교체

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

15 단계
iPad Pro 12.9" 4th Gen Logic Board Replacement, Peel the upper antenna cable: 0 단계, 이미지 3개 중 1개 iPad Pro 12.9" 4th Gen Logic Board Replacement, Peel the upper antenna cable: 0 단계, 이미지 3개 중 2개 iPad Pro 12.9" 4th Gen Logic Board Replacement, Peel the upper antenna cable: 0 단계, 이미지 3개 중 3개
Peel the upper antenna cable
  • Use blunt nose tweezers or your fingernail to peel the tape securing the upper antenna cable to the right arm of the logic board.

  • Don't try to fully remove the cable—one more piece of tape secures it to the logic board.

  • If the tape feels stuck, pull the body of the cable with your fingers as you peel the tape.

무딘 코 핀셋이나 손톱을 사용하여 상단 안테나 케이블을 로직 보드의 오른쪽 팔에 고정하는 테이프를 벗겨내세요.

케이블을 완전히 분리하려고 하지 마세요-테이프가 하나 더 로직 보드에 고정되어 있습니다.

테이프가 걸리는 느낌이 들면 손가락으로 케이블 몸체를 잡아당기면서 테이프를 벗겨내세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.