주요 콘텐츠로 건너뛰기

iPad Pro 12.9" 4th Gen 전원 버튼 교체

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 3 안내서에 영향을 미칩니다.

1 단계 번역중

1 단계
iPad Pro 12.9" 4th Gen Power Button Replacement, Unfasten the rear camera shield: 0 단계, 이미지 1개 중 1개
Unfasten the rear camera shield
  • Use your Phillips screwdriver to remove the six screws securing the rear camera shield:

  • Three 1.2 mm screws

  • One 2.8 mm screw

  • One 2.6 mm screw

  • One 1.8 mm screw

필립스 스크루드라이버를 사용하여 후면 카메라 실드를 고정하는 나사 6개를 풀어주세요:

1.2mm 나사 3개

2.8mm 나사 1개

2.6mm 나사 1개

1.8mm 나사 1개

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.