주요 콘텐츠로 건너뛰기

iPad Pro 12.9" 4th Gen 로직 보드 교체

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

10 단계
iPad Pro 12.9" 4th Gen Logic Board Replacement, Disconnect the remaining antenna cables: 0 단계, 이미지 3개 중 1개 iPad Pro 12.9" 4th Gen Logic Board Replacement, Disconnect the remaining antenna cables: 0 단계, 이미지 3개 중 2개 iPad Pro 12.9" 4th Gen Logic Board Replacement, Disconnect the remaining antenna cables: 0 단계, 이미지 3개 중 3개
Disconnect the remaining antenna cables
  • Use the point of your spudger to pry up and disconnect the remaining two antenna cables from the left edge of the logic board.

  • Pry on only the metal head of the connector. Avoid lifting the cable itself as much as possible.

스퍼저의 끝 부분을 사용하여 로직 보드의 왼쪽 가장자리에서 나머지 두 개의 안테나 케이블을 들어 올려 분리하세요.

커넥터의 금속 머리 부분만 들어 올려 분리하세요. 케이블 자체는 최대한 들어 올리지 마세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.