주요 콘텐츠로 건너뛰기

iPad Pro 12.9" 4th Gen 로직 보드 교체

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

22 단계
iPad Pro 12.9" 4th Gen Logic Board Replacement, Remove the press connector bracket: 0 단계, 이미지 3개 중 1개 iPad Pro 12.9" 4th Gen Logic Board Replacement, Remove the press connector bracket: 0 단계, 이미지 3개 중 2개 iPad Pro 12.9" 4th Gen Logic Board Replacement, Remove the press connector bracket: 0 단계, 이미지 3개 중 3개
Remove the press connector bracket
  • Use the flat end of your spudger to slide the bottom right press connector bracket away from the logic board.

  • Use blunt nose tweezers or your fingers to remove the bracket.

  • During reassembly, orient the bracket so the outward-bent wings face the battery.

스퍼저의 납작한 끝을 사용하여 오른쪽 하단 프레스 커넥터 브래킷을 로직 보드에서 밀어내세요.

무딘 코 핀셋이나 손가락을 사용하여 브래킷을 분리하세요.

재조립할 때 바깥쪽으로 구부러진 날개가 배터리를 향하도록 브래킷의 방향을 조절하세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.