주요 콘텐츠로 건너뛰기

Cruiser Bike Rear Wheel Replacement

5 단계 번역중

5 단계
Cruiser Bike Rear Wheel Replacement: 0 단계, 이미지 1개 중 1개
  • With the wheel pulled back, tighten the two axle nuts using the 15 mm socket wrench.

  • Tighten the non-drive side (side without the chain) first.

  • The wheel will angle as you tighten. Keep it centered with your hand as you finish tightening both axle nuts.

  • Use a tire pump to make sure the tire is full of air and ready to ride.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.