주요 콘텐츠로 건너뛰기

Kobo Libra Colour电源按钮板更换

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

7 단계
Kobo Libra Colour Power Button Board Replacement, Soften the motherboard coating: 0 단계, 이미지 2개 중 1개 Kobo Libra Colour Power Button Board Replacement, Soften the motherboard coating: 0 단계, 이미지 2개 중 2개
Soften the motherboard coating
  • If you aren't replacing the white interconnect cable skip to this step.

  • Apply a heated iOpener to the interconnect cable's ZIF connector on the motherboard for 90 seconds to soften the coating.

  • Alternatively, you can use a hair dryer or a heat gun for 30 seconds.

如果不更换白色互连排线,请跳至 本步骤

将加热的 iOpener 放在主板上的 ZIF 互连排线接口上 90 秒,以软化涂层。

或者,你也可以用吹风机或热风枪吹 30 秒钟。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.