주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

1 단계 번역 중

1 단계
Apple sticks a small strip of clear plastic with adhesive applied to one side of the logic board behind the camera cable connector to keep it in its socket. When moving it out of the way, be sure not to break any surface-mount components off the logic board.
  • Apple sticks a small strip of clear plastic with adhesive applied to one side of the logic board behind the camera cable connector to keep it in its socket. When moving it out of the way, be sure not to break any surface-mount components off the logic board.

  • Use the tip of a spudger to rotate the plastic retainer away from the camera cable connector.

Apple hat ein kleines Stück durchsichtigen Kunstoffs auf einer Seite des Logic Boards hinter den Stecker des Kamerakabel geklebt, damit der Stecker im Anschluss drin bleibt. Achte beim Entfernen darauf, dass du keine oberflächenmontierte Bauteile auf dem Logic Board beschädigst.

Drehe den Kunstoffhalter mit der Spudgerspitze vom Kamerakabelstecker weg.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.