주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 52개에 영향을 미칩니다.

4 단계
Carefully place a suction cup halfway up the heated side. Be sure the cup is completely flat on the screen to get a tight seal. While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.
  • Carefully place a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.

  • If your iPad's screen is badly cracked, covering it with a smooth layer of clear packing tape may help the suction cup adhere. Alternatively, use a strong piece of tape (such as duct tape) and fold it into a handle.

Befestige einen Saugheber auf der linken Seite in der Mitte des iPads.

Drücke den Saugnapf flach auf den Touch Screen.

Halte das iPad mit der einen Hand fest und hebe mit der anderen vorsichtig den Touch Screen vom Gehäuse.

Wenn das Display deines iPads sehr zersplittert ist, kann es hilfreich sein, es mit durchsichtigem Klebeband abzukleben, damit der Saugheber hält. Sonst kannst du auch ein Stück starkes Paketklebeband so falten, dass es einen Griff bildet.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.