주요 콘텐츠로 건너뛰기

iPhone 6 로직 보드 교체

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

16 단계
iPhone 6 Logic Board Replacement: 0 단계, 이미지 2개 중 1개 iPhone 6 Logic Board Replacement: 0 단계, 이미지 2개 중 2개
  • Use the flat end of a spudger to lift the battery connector end of the logic board up slightly, just enough to grab with your fingers.

  • Insert the spudger near the metal shields below the SIM card tray to avoid damaging any chips or sockets.

스퍼저의 납작한 끝을 사용하여 로직 보드의 배터리 커넥터 끝을 손가락으로 잡을 수 있을 정도만 살짝 들어 올리세요.

칩이나 소켓의 손상을 방지하기 위해 스퍼저를 SIM 카드 트레이 아래의 금속 실드 근처에 끼우세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.