주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

3 단계
Use the flat end of a spudger to lift the rear-facing camera connector up off of its socket on the logic board. Gently push the rear-facing camera cable to the left, away from the logic board. Gently push the rear-facing camera cable to the left, away from the logic board.
  • Use the flat end of a spudger to lift the rear-facing camera connector up off of its socket on the logic board.

  • Gently push the rear-facing camera cable to the left, away from the logic board.

Hebe den Stecker der Rückkamera mit dem flachen Ende des Spudgers hoch und aus seinem Anschluss auf dem Logic Board heraus.

Drücke das Kabel der Rückkamera vorsichtig nach links, weg vom Logic Board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.