주요 콘텐츠로 건너뛰기

Nintendo 2DS Rückabdeckung Austausch

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

3 단계 번역중

3 단계
Nintendo 2DS Rear Panel Replacement: 0 단계, 이미지 1개 중 1개
  • Use your fingernail or the flat end of a spudger to flip up the connector securing the ribbon cable to the motherboard

  • Remove the cable from the connector

  • Take the opportunity to remove the Left and Right triggers, they have hinges that may break and springs that may jump away.

Klappe den Sicherungsbügel des Flachbandkabels mit dem Fingernagel oder dem flachen Ende des Spudgers hoch und ziehe das Kabel von der Hauptplatine ab.

Löse das Kabel aus dem Anschluss ab.

Nutze die Gelegenheit um gleich die rechte und linke Auslösetaste zu entfernen. Sie haben eine Feder und eine Achse, achte darauf diese Teile nicht zu beschädigen oder zu verlieren.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.