주요 콘텐츠로 건너뛰기

Sostituzione del Pannello Posteriore del Nintendo 2DS

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

영어
이탈리아어

3 단계 번역중

3 단계
Nintendo 2DS Rear Panel Replacement: 0 단계, 이미지 1개 중 1개
  • Use your fingernail or the flat end of a spudger to flip up the connector securing the ribbon cable to the motherboard

  • Remove the cable from the connector

  • Take the opportunity to remove the Left and Right triggers, they have hinges that may break and springs that may jump away.

Usa la tua unghia o l'estremità piatta di un bastone di plastica per sollevare il connettore che fissa il cavo a nastro alla scheda madre.

Rimuovi il cavo dal connettore

Cogli l'opportunità di rimuovere i due pulsanti dorsali L e R, hanno dei cardini che potrebbero rompersi e delle molle che potrebbero schizzare via.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.