주요 콘텐츠로 건너뛰기

Comment remplacer une chambre à air de vélo crevée sur un Trek 800

영어
프랑스어

12 단계 번역중

12 단계
Trek 800 Bicycle Rear Tire Bike Tube Replacement: 0 단계, 이미지 3개 중 1개 Trek 800 Bicycle Rear Tire Bike Tube Replacement: 0 단계, 이미지 3개 중 2개 Trek 800 Bicycle Rear Tire Bike Tube Replacement: 0 단계, 이미지 3개 중 3개
  • Inflate the tube to the specified pressure on tire sidewall (refer to step 2).

  • Insert the tire pump head into the valve, and lock with lever on the pump head.

  • This tire is inflated to a maximum pressure of 40 psi.

Gonflez le pneu à la pression préconisée.

Le pneu ici est censé être gonflé à 40 PSI, soit env. 2,76 Bar.

-[* black] Pump the tire up to the specified pressure
- [* black] This tire is supposed to be at 40 PSI
+[* icon_reminder] Inflate the tube to the specified pressure on tire sidewall (refer to step 2).
+[* black] Insert the tire pump head into the valve, and lock with lever on the pump head.
+[* icon_note] This tire is inflated to a maximum pressure of 40 psi.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.