주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 25개에 영향을 미칩니다.

2 단계
Once the rear glass is hot to the touch, apply a suction cup near the bottom edge  of the glass. Lift on the suction cup to create a small gap underneath the rear glass, and insert an opening pick into the gap. Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap to help weaken the adhesive in the following steps.
  • Once the rear glass is hot to the touch, apply a suction cup near the bottom edge of the glass.

  • Lift on the suction cup to create a small gap underneath the rear glass, and insert an opening pick into the gap.

  • Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap to help weaken the adhesive in the following steps.

将吸盘紧紧吸在后部玻璃面板的下部。

[* black] AttachOnce the rear glass is hot to the touch, apply a suctionsuction cup near the bottom edge of the glass.
[* black] Lift on the suction
cup to create a small gap underneath the lower halfrear glass, and insert an opening pick into the gap.
[* icon_note] Optionally, once the pick is inserted, you can add a few drops
of isopropyl alcohol into the rear glass panelgap to help weaken the adhesive in the following steps.
[* black] AttachOnce the rear glass is hot to the touch, apply a suctionsuction cup near the bottom edge of the glass.
[* black] Lift on the suction
cup to create a small gap underneath the lower halfrear glass, and insert an opening pick into the gap.
[* icon_note] Optionally, once the pick is inserted, you can add a few drops
of isopropyl alcohol into the rear glass panelgap to help weaken the adhesive in the following steps.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.