주요 콘텐츠로 건너뛰기

Procedura di apertura

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 25개에 영향을 미칩니다.

영어
이탈리아어
2 단계
Opening Procedure: 0 단계, 이미지 3개 중 1개 Opening Procedure: 0 단계, 이미지 3개 중 2개 Opening Procedure: 0 단계, 이미지 3개 중 3개
  • Apply a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup with strong, steady force to create a gap.

  • Depending on the age of your device, this may be difficult. If you have trouble, apply more heat and try again.

  • Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

Posiziona una ventosa al centro del bordo sinistro.

Assicurati che la ventosa sia completamente piatta sul vetro per avere una presa salda.

Mentre tieni fermo l'iPad con una mano, tira la ventosa con una forza costante per creare una fessura.

A seconda dell'età del tuo dispositivo, questo potrebbe essere difficile. Se stai avendo problemi, applica più calore e riprova.

Sta' attento a sollevare il vetro solo il sufficiente per infilarci un plettro. Se lo sollevi di più rischi di rompere il vetro.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.