주요 콘텐츠로 건너뛰기

Öffnungsprozedur

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 25개에 영향을 미칩니다.

11 단계
Opening Procedure: 0 단계, 이미지 3개 중 1개 Opening Procedure: 0 단계, 이미지 3개 중 2개 Opening Procedure: 0 단계, 이미지 3개 중 3개
  • Leave the opening pick in the iPad slightly past the front-facing camera.

  • Take a second pick and insert it to the left of the camera, where the first pick just was. Slide it back to the corner to completely cut any remaining adhesive.

  • Leave the second pick in place to prevent the corner adhesive from re-sealing as it cools.

Lasse ein Plektrum kurz nach der Frontkamera im iPad stecken.

Nimm ein zweites Plektrum und setze es links neben der Kamera ein, wo gerade eben das erste Plektrum war. Schiebe es zur Ecke zurück, um jeglichen Kleber vollständig zu lösen.

Lasse das zweite Plektrum an Ort und Stelle, um zu vermeiden, dass sich der Kleber in der Ecke beim Abkühlen wieder verbindet.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.