주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

영어
프랑스어
3 단계
If you have the original version of the MacBook Air (A1237), refer to picture 1. Remove the following screws securing the heat sink to the logic board: One 5.9 mm Phillips screw.
  • If you have the original version of the MacBook Air (A1237), refer to picture 1. Remove the following screws securing the heat sink to the logic board:

  • One 5.9 mm Phillips screw.

  • Two 1.9 mm Phillips screws.

  • One 1.9 mm Phillips screw.

  • If you have the A1304 version of MacBook Air, refer to picture 2. Remove the following screws securing the heat sink to the logic board:

  • One 5.0 mm Phillips screw

  • Five 1.9 mm Philips screws.

  • One 2.5 mm Phillips screw.

Si vous avez la version originale du MacBook Air (A1237), reportez-vous à la photo 1. Retirez les vis suivantes fixant le dissipateur thermique à la carte mère :

Une vis cruciforme de 5,9 mm

Deux vis cruciformes de 1,9 mm

Une vis cruciforme de 1,9 mm

Si vous avez la version A1304 de MacBook Air, reportez-vous à la photo 2. Retirez les vis suivantes fixant le dissipateur thermique à la carte mère :

Une vis cruciforme de 5,0 mm

Cinq vis cruciformes de 1,9 mm

Une vis cruciforme de 2,5 mm

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.