이 사용자는 아직 프로필을 작성하지 않았습니다.
질문
I've recently got an used 3DS XL. It's condition is kinda sub-meh but it works… except for its top screen which as the...
더 읽어보기I didn't start my PSP up for a very long while (at least a year or two) and when I tried to power it on, the battery was...
더 읽어보기Just as the topic mentioned, some ribbon cable connectors are not locking like how the connector of circlepad works (they...
더 읽어보기답변
First of all, you have to know how to open the top shell. The solution is shown here: How to remove top shell of New 3DS XL 2015?. Now if both left and right speaker works(by any chance because of the first reason) , the ribbon cable should be completely fine, and you probably just didn't align the exterior slider and the interior one correctly. Now in this image , inside the red circle is the small circuit board that connects to the speaker. You can see there's a little black thing sticking out. That is the "interior" slider, and in the yellow circle which is the "exterior" slider(not the perfect angle but meh you can see it), you can see there's a place for that little black thing to stay. This is how the interior slider move when you move the exterior one. To align them, you simply just have to move the exterior slider to very bottom and do the same to the little black piece, then place that small board back and make sure the little black piece is aligned perfectly. The same is to be done at the other...
더 읽어보기First, is your console cracked?(not physically, but Gateway, A9LH etc.) This could be the main reason for your situation Second, there may be some issues with the wifi board, check the connection of it and see if the problem persists. If it does, consider about contacting Nintendo and see what they can do for you or maybe another person will be able to help.
더 읽어보기I know you had checked many times, but did you plug in the ribbon cables correctly? Some cables' copper side are supposed to be plugged to another side of connector. This is the only solution this inexperienced person can think of, no guarantee this will work but it's worth a shot.
더 읽어보기While I cannot find any place to get a replacement screen except for those Chinese websites, you can check the ribbon cable connection first, maybe it got loose or something.
더 읽어보기If my assumptions are correct, something's wrong with your wifi board. It may be the wifi board itself/it's wire being damaged, or the connection got loose. Try to open up the console and check it.
더 읽어보기This problem is already answered How to remove top shell of New 3DS XL 2015?.
더 읽어보기Now if you mean this piece it's very simple. First remove these 4 plastic pieces that are circled here that are hiding the screws (nope nothing under rubber stopper this time), then remove the screws. After that simply pry open the shell from where the red circle is and you're free to go.
더 읽어보기The official Japanese Nintendo site stated that this is caused by unstable internet. Perhaps your router was not at it's best shape?
더 읽어보기This problem can be as simple as the battery died or ribbon cables inside getting loose. And although very unlikely, there could be some issues with the motherboard as my friend's new 3ds xl had the same problem and that's why his console won't start.
더 읽어보기안내서 댓글
Can someone provide further information about replacement of the entire C stick?
Or is it just as simple as pull the ribbon carefully, take the old one out and put the new one in?
It will work, since the only difference between them is the size of screen and shell, but size of buttons and other pieces should be of the same.