PS1 Spindle motor not spinning

I have a SCPH-1001 model PS1 with a PU-8 board (later model). I have not been able to find a schematic for this version. The problem is the spindle motor is not spinning. The laser moves back and forth on the rails fine and attempts to focus when power is applied but the spindle does not move. I have used a 9V battery and the spindle motor spins up fine that way. I believe it is the IC722 chip but I’m not entirely sure. anyone have a schematic or suggestion for this board?

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
의견 추가하세요