알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 9개에 영향을 미칩니다.
1 단계 번역중
-
Remove the screen.
-
If you replaced your screen, check the front-facing camera hole and the sensor cutout on your replacement screen, and remove any remaining liners.
-
Check your phone if the proximity sensor's rubber gasket is missing—it might be stuck to the back of your old screen. Replace it if necessary.
-
This is a good point to test your phone before sealing it up. Temporarily connect your screen, power on your phone, and make sure it works as expected. Before continuing with reassembly, power off your phone.
-
Follow this guide to replace the screen adhesive.
-
If you're installing a new screen, follow this guide to calibrate the fingerprint sensor.
| [title] Reassembly information | |
| [* black] Remove the screen. | |
| [* icon_reminder] During reassembly: | |
| [* red] If you replaced your screen, check the front-facing camera hole and the sensor cutout on your replacement screen, and remove any remaining liners. | |
| [* orange] Check your phone if the proximity sensor's rubber gasket is missing—it might be stuck to the back of your old screen. Replace it if necessary. | |
| - | [* black] This is a good point to test your phone before sealing it up. Temporarily connect your screen, power on your phone, and make sure it works as expected. Before continuing with reassembly, ***power off your phone |
| + | [* black] This is a good point to test your phone before sealing it up. Temporarily connect your screen, power on your phone, and make sure it works as expected. Before continuing with reassembly, ***power off your phone***. |
| [* icon_note] ***Remember to reinstall the display cable bracket.*** | |
| [* black] Follow [guide|156725|this guide|new_window=true] to replace the screen adhesive. | |
| [* black] If you're installing a new screen, follow [guide|166753|this guide|new_window=true] to calibrate the fingerprint sensor. |
귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.