주요 콘텐츠로 건너뛰기
도움말
4단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Caution: Be careful not to touch the capacitor wires as you work. If possible, use a capacitor discharge probe to safely rid the capacitors of dangerous charges.

Place the camera facing with the lens down. Grab the black capacitor and gently remove the assembly from the holder.

Locate the ribbon cable connecting the capacitor to the top of the camera. Grasp the ribbon cable with your fingers, and gently pull outwards.

Note: You may need to gently wiggle the connector back and forth to work it out. Do not use much force to pull the cable out. If it is too difficult to remove, use the plastic pry tool to pull the connector by the tabs on the side.

Now the flash capacitor assembly is disconnected from the camera and can be removed.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.