주요 콘텐츠로 건너뛰기
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

If this guide is used as a prerequisite, the hard drive may not need to be removed.

The I/O daugherboard can be removed if it is in the way.

Disconnect the flat flex cable over the hard drive. To do this, lift the black locking tab up and remove the cable from the ZIF socket.

To remove the hard drive, tilt it forward starting with the SATA interface. Once it is removed, set it aside as shown.

Disconnnect the drive cable. Wiggle the cable off until it is released. Do not force the cable off of the old drive. It may be slightly more difficult on a system that has never been serviced.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.