주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

If your hard drive has a plastic sticker over the PCB and an SSD is installed, put this in the chassis in case a traditional hard drive is installed later.

If your drive has a plastic sticker over the PCB, transfer this to the new drive. Do this BEFORE installation.

Remove the drive bumpers from the old drive. Transfer these to the new hard drive.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.