주요 콘텐츠로 건너뛰기

Sostituzione piedini Logitech G Pro X Superlight

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
이탈리아어
3 단계
Logitech G Pro X Superlight Feet Replacement: 0 단계, 이미지 3개 중 1개 Logitech G Pro X Superlight Feet Replacement: 0 단계, 이미지 3개 중 2개 Logitech G Pro X Superlight Feet Replacement: 0 단계, 이미지 3개 중 3개
  • The feet have two layers—a rubberized one and an adhesive pad underneath.

  • If you're reusing the feet, be very careful not to separate the two layers or damage the feet.

  • Carefully slide the point of a spudger under the circular foot, making sure it goes under both the foot and its adhesive pad.

  • The foot recesses have a small notch that makes it easier to slide your spudger under.

  • Gently slide the spudger farther under the foot and lift until you can grab it with your fingers.

I piedini hanno due strati: uno di gomma e un cuscinetto adesivo al di sotto.

Se vuoi riutilizzare i piedini, fa' attenzione a non separare i due strati o danneggiarli.

Fai scorrere con cautela la punta di uno spudger sotto il piedino grande vicino alla parte anteriore del mouse, accertandoti che vada sia sotto al piedino che al cuscinetto adesivo.

Gli incavi per i piedini sono dotati di una piccola tacca che facilita lo scorrimento dello spudger.

Fai scorrere con cautela lo spudger più in profondità sotto al piedino e sollevalo finché non riesci ad afferrare il cuscinetto con le dita.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.