주요 콘텐츠로 건너뛰기

Changement patins Logitech G Pro X Superlight

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
프랑스어

6 단계 번역중

6 단계
Logitech G Pro X Superlight Feet Replacement, Reassembly information: 0 단계, 이미지 3개 중 1개 Logitech G Pro X Superlight Feet Replacement, Reassembly information: 0 단계, 이미지 3개 중 2개 Logitech G Pro X Superlight Feet Replacement, Reassembly information: 0 단계, 이미지 3개 중 3개
Reassembly information
  • To install a new foot:

  • If any of the feet got damaged during removal or separated from their adhesive pads, replace them.

  • Use a spudger to carefully scrape up and remove any remaining adhesive bits.

  • Use isopropyl alcohol and a microfiber cloth to thoroughly clean all adhesive residue from the foot recesses. Allow the surface to completely dry.

  • Remove the feet from their backing and firmly press them into place.

Voici comment installer un nouveau patin :

Si l'un des patins a été endommagé lors du retrait ou s'est détaché de sa pastille adhésive, remplacez-le.

Utilisez une spatule (spudger) pour racler et retirer avec précaution les morceaux d'adhésif restants.

Utilisez de l'alcool isopropylique et un chiffon en microfibres pour nettoyer soigneusement tous les résidus de colle des renfoncements du patin. Laissez la surface sécher complètement.

Retirez les patins de leur revêtement protecteur et appuyez fermement dessus pour les mettre en place.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.