주요 콘텐츠로 건너뛰기

Sostituzione piedini Logitech G Pro X Superlight

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
이탈리아어

6 단계 번역중

6 단계
Logitech G Pro X Superlight Feet Replacement, Reassembly information: 0 단계, 이미지 3개 중 1개 Logitech G Pro X Superlight Feet Replacement, Reassembly information: 0 단계, 이미지 3개 중 2개 Logitech G Pro X Superlight Feet Replacement, Reassembly information: 0 단계, 이미지 3개 중 3개
Reassembly information
  • To install a new foot:

  • If any of the feet got damaged during removal or separated from their adhesive pads, replace them.

  • Use a spudger to carefully scrape up and remove any remaining adhesive bits.

  • Use isopropyl alcohol and a microfiber cloth to thoroughly clean all adhesive residue from the foot recesses. Allow the surface to completely dry.

  • Remove the feet from their backing and firmly press them into place.

Per installare nuovi piedini:

Se alcuni sono stati danneggiati durante la rimozione o separati dai loro cuscinetti adesivi, sostituiscili.

Usa uno spudger per grattare con attenzione e rimuovere tutti i pezzi di adesivo rimasti.

Usa alcool isopropilico e un panno in microfibra per pulire tutti i residui di adesivo rimasti dagli incavi dei piedini. Lascia che la superficie si asciughi completamente.

Rimuovi i piedini dalle pellicole dell'adesivo e premili saldamente in posizione.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.