주요 콘텐츠로 건너뛰기

Reemplazo de la batería del Logitech G Pro X

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
스페인어

3 단계 번역중

3 단계
Logitech G Pro X Superlight Battery Replacement: 0 단계, 이미지 1개 중 1개
  • Remove the battery.

  • During reassembly:

  • Never install a deformed or damaged battery, as doing so is a potential safety hazard. Replace it with a new battery.

  • If you're reusing the battery, the adhesive should be sticky enough to use again.

  • If the adhesive isn't sticky enough, or if your new battery doesn't come with adhesive, apply strips of thin, double-sided tape to the battery recess (not directly to the battery).

  • If your new battery has adhesive pre-installed, remove the plastic liner to expose the adhesive.

  • Make sure the cable is pointing towards the front of the shell (closest to the scroll wheel), and firmly press the battery into place.

Retira la batería.

Durante el reensamblaje:

No instales nunca una batería deformada o dañada, ya que hacerlo supone un riesgo potencial para la seguridad. Sustitúyela por una batería nueva.

Si vas a reutilizar la batería, el adhesivo debe ser lo suficientemente pegajoso como para volver a usarlo.

Si el adhesivo no es lo suficientemente pegajoso, o si la batería nueva no viene con adhesivo, coloca tiras de cinta adhesiva fina de doble cara en el hueco de la batería (no directamente en la batería).

Si tu batería nueva tiene adhesivo preinstalado, retira el revestimiento de plástico para dejar a la vista el adhesivo.

Asegúrate de que el cable apunta hacia la parte delantera de la carcasa (lo más cerca posible de la rueda de desplazamiento), y presiona firmemente la batería para colocarla en su sitio.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.