주요 콘텐츠로 건너뛰기

Sostituzione copertura scheda madre Nintendo Wii

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

영어
이탈리아어
10 단계
Nintendo Wii Motherboard Cover Replacement: 0 단계, 이미지 3개 중 1개 Nintendo Wii Motherboard Cover Replacement: 0 단계, 이미지 3개 중 2개 Nintendo Wii Motherboard Cover Replacement: 0 단계, 이미지 3개 중 3개
  • Remove the three 10 mm Phillips screws securing the black bracket to the bottom panel near the front of the Wii.

  • Slightly lift the bracket and use your other hand to pull the retaining clip away from where the Wi-Fi antennas enter the motherboard sheild.

  • Remove the bracket from the Wii.

  • Be sure not to lose the small square nut loosely held by the black plastic bracket.

Rimuovi le tre viti a croce Phillips da 10 mm che fissano la staffa nera al pannello inferiore accanto alla parte frontale della Wii.

Solleva leggermente la staffa e utilizza l'altra mano per tirare via la clip di bloccaggio da dove le antenne Wi-Fi entrano nella copertura della scheda madre.

Rimuovi la staffa dalla Wii.

Assicurati di non perdere il piccolo dado quadrato debolmente tenuto dalla staffa nera in plastica.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.