기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다
I am trying to replace the joystick due to it sticking/stick drift; however, I cannot remove the existing solder. Does anyone have any tips or am I doing it wrong? I also believe I've burnt the circuit board but luckily this is a practice one.
좋은 질문입니까?
평판: 3.7k
12
3
3
Hi @jayshiz
I would apply flux to the solder joints and use low melt solder to mix with the existing (probably lead free) solder. It will make it easier to reflow them with a heat gun or a soldering iron.
Once you managed to get it out, clean the holes with solder wick and you'll have no problem installing the new stick.
Hope it helps!
이 답변이 도움이 되었나요?
sorry, your initial comment was incredibly helpful, but could you explain more how using a heat gun will reflow, I have a very basic understanding of soldering, but I'm still learning, and there's no tutorials online explaining this. Thanks!
I am in the process of making a guide how to do it. I will link it here so you can follow it along.
지난 24시간: 3
지난 7일: 34
지난 30일: 105
전체 시간: 1,601
