주요 콘텐츠로 건너뛰기

Sostituzione gruppo scheda logica MacBook Pro 13" Touch Bar fine 2016

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

영어
이탈리아어

1 단계 번역중

1 단계
MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Remove the keyboard connector screws: 0 단계, 이미지 2개 중 1개 MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Remove the keyboard connector screws: 0 단계, 이미지 2개 중 2개
Remove the keyboard connector screws
  • Use a T3 Torx driver to remove the two 1.9 mm screws from the keyboard connector bracket.

Usa un cacciavite Torx T3 per rimuovere le due viti da 1,9 mm dalla staffa del connettore della tastiera.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.