주요 콘텐츠로 건너뛰기

2016年末带 Touch Bar 的13寸MacBook Pro 主板更换

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

10 단계
MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Remove the Touch ID connector screws: 0 단계, 이미지 2개 중 1개 MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Remove the Touch ID connector screws: 0 단계, 이미지 2개 중 2개
Remove the Touch ID connector screws
  • Use a T3 Torx driver to remove the two 1.9 mm screws from the cover bracket securing the Touch ID and 3.5 mm audio jack connectors.

使用 T3 梅花槽螺丝刀从护盖支架上卸下两个1.9 mm 螺丝,以固定 Touch ID 和3.5 mm 音频插孔接口。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.