주요 콘텐츠로 건너뛰기

2016年末带 Touch Bar 的13寸MacBook Pro 主板更换

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

38 단계
MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement: 0 단계, 이미지 1개 중 1개
  • Repeat the previous step to disconnect the two remaining antenna cables.

  • To reconnect each cable, align the connector directly over its socket, and then press down to snap it into place.

重复上一步,断开其余两根天线电缆的接口。

要重新连接每条电缆,请将接口直接对准其插座,然后向下按以将其卡入到位。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.