주요 콘텐츠로 건너뛰기

Procedimiento de apertura

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 73개에 영향을 미칩니다.

영어
스페인어
3 단계
Opening Procedure, Anti-Clamp instructions: 0 단계, 이미지 3개 중 1개 Opening Procedure, Anti-Clamp instructions: 0 단계, 이미지 3개 중 2개 Opening Procedure, Anti-Clamp instructions: 0 단계, 이미지 3개 중 3개
Anti-Clamp instructions
  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Place an object under your iPad so it rests level between the suction cups.

  • Position the suction cups near the middle of the left edge—one on the top, and one on the bottom.

  • Hold the bottom of the Anti-Clamp steady and firmly press down on the top cup to apply suction.

  • If you find that the surface of your iPad is too slippery for the Anti-Clamp to hold onto, use tape to create a grippier surface.

Los siguientes tres pasos muestran el Anti-Clamp, una herramienta diseñada para hacer el procedimiento de apertura más fácil. Si no estás usando el Anti-Clamp, salta dos pasos para un método alternativo.

Para instrucciones completas de como usar el Anti-Clamp, checa esta guía.

Jala el mango azul hacia atrás para desbloquear los brazos del Anti Clamp.

Coloca un objeto debajo de tu iPad para que repose a nivel de las ventosas de succión.

Posiciona las ventosas de succión cerca del centro del borde izquierdo--una arriba, y una abajo.

Sostén el inferior del Anti-Clamp firmemente y presiona hacia abajo en la ventosa superior para aplicar succión.

Si encuentras que la superficie de tu iPad es muy resbalosa para que el Anti-Clamp se sostenga, usa cinta para crear una superficie con más agarre.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.