주요 콘텐츠로 건너뛰기

iPad Pro 12.9" 3rd Gen 배터리 교체

14 단계 번역중

14 단계
iPad Pro 12.9" 3rd Gen Battery Replacement, Remove the battery: 0 단계, 이미지 1개 중 1개
Remove the battery
  • Remove the battery.

  • During reassembly, remove the old adhesive with tweezers and isopropyl alcohol.

  • If there are any drops of isopropyl alcohol remaining, use a lint-free cloth to wipe them away or allow the iPad to air dry before installing a new battery.

  • Apply stretch-release adhesive strips, double sided adhesive tape, or pre-cut adhesive to secure the new battery.

  • Don't reuse the battery after it has been removed, as doing so is a potential safety hazard.

배터리를 분리하세요.

재조립 할 때, 핀셋과 이소프로필 알코올로 기존 접착제를 분리하세요.

이소프로필 알코올이 남아있는 경우 보풀이 없는 천을 사용하여 닦아내거나 새 배터리를 설치하기 전에 iPad를 자연 건조시키세요.

신축성 접착 테이프, 양면 접착 테이프 또는 미리 자른 접착제를 사용하여 새 배터리를 고정하세요.

분리한 배터리를 재사용하면 안전상의 위험이 있으므로 재사용하지 마세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.